The PF error on your Maytag Washer means the machine detected a power failure during a wash cycle. This usually just requires you to restart the cycle, but if it keeps happening, there could be a power supply issue worth checking.

Error code PF
Meaning Power failure detected during operation
Severity Low — usually resolved by restarting the cycle
Time to fix 5–15 minutes
Tools needed None

What the PF error means

The PF code tells you the washer lost power partway through a cycle, whether from a brief outage, someone unplugging the unit, or a tripped breaker. It’s not a fault with the machine itself but a record that the cycle was interrupted. Once power is restored, the washer displays PF to let you know the previous cycle didn’t finish normally.

Common causes

  • A brief household power outage or brownout
  • A tripped circuit breaker or blown fuse
  • The washer being accidentally unplugged or the power cord jostled loose
  • Someone switching off a wall socket connected to the washer
  • Electrical storms causing momentary power drops
  • A loose connection in the home’s wiring or outlet

How to fix the PF error

  1. Clear the code — Press Start or Pause/Cancel to clear the PF display, since the washer is just reporting the interruption.
  2. Check the power source — Confirm the washer is fully plugged in and the outlet is working by testing another appliance in the same socket.
  3. Inspect the breaker panel — Look for a tripped breaker or blown fuse feeding the laundry room and reset it if needed.
  4. Restart the cycle — Select your wash settings again and press Start. The washer should run normally once power is stable.
  5. Watch for repeat outages — If PF appears repeatedly without an obvious power cut, have an electrician check the outlet and wiring for loose connections.
  6. Check for other codes — If PF is followed by another error, it may point to a separate issue; codes like Maytag Washer F1 Error Code: Causes and Fixes or Maytag Washer F2 Error Code: Causes and Fixes can appear alongside power-related faults.

FAQ

Does the PF error mean my washer is broken?
No. It simply means the cycle was interrupted by a power loss. In most cases, restarting the cycle fixes it completely.

Will I lose my laundry cycle progress if PF appears?
Yes, the current cycle stops and you’ll need to restart it from the beginning once power returns.

What should I do if PF keeps appearing without a power cut?
Check the outlet, plug, and breaker first. If those look fine, compare it with other codes such as Maytag Washer F3 Error Code: Causes and Fixes or Maytag Washer F5 Error Code: Causes and Fixes, since these may point to an internal fault rather than a power issue.