The LE error on your LG Washer means the motor is locked or overloaded and cannot spin properly. This typically happens when the drum is jammed, the load is unbalanced, or the motor has failed.

Error code LE (also displayed as LE1)
Meaning Motor locked error or overload condition
Severity High — Washer will not complete cycle and may damage motor if ignored
Time to fix 10–45 minutes
Tools needed None for basic fixes; socket set and multimeter for advanced repairs

What the LE error means

The LE error code stands for “motor locked error” and indicates that the washer’s motor cannot turn the drum properly. This happens when the control board detects excessive resistance or no movement from the motor during the spin cycle. The washer’s safety system triggers this error to prevent motor burnout and further damage to internal components.

Common causes

  • Overloaded drum with too many heavy items like towels or blankets
  • Foreign objects (coins, small clothing items, bra wires) stuck between the drum and tub
  • Worn or damaged motor hall sensor that cannot detect drum rotation
  • Faulty rotor position sensor or stator assembly preventing proper motor operation
  • Damaged motor bearings causing excessive friction and resistance
  • Loose or corroded wire connections between the motor and control board

How to fix the LE error

  1. Reset the washer and reduce load size — Unplug the washer for 60 seconds, then plug it back in. Remove half the laundry if the drum is packed tightly, as overloading is the most common cause. Restart the cycle with a smaller, balanced load.
  2. Check for objects blocking the drum — Empty the washer completely and manually rotate the drum by hand. If it feels stiff or you hear grinding, check the rubber boot seal and look inside the drum for foreign objects. Remove any items wedged between the drum and outer tub.
  3. Inspect and test the hall sensor — Unplug the washer and access the motor (usually at the back or bottom). Locate the hall sensor attached to the stator assembly. Check the wire connections for corrosion or looseness. Test the sensor with a multimeter (should read 5–12 ohms). Replace if readings are incorrect or connections are damaged.
  4. Examine the rotor and stator — With the motor accessible, inspect the rotor (attached to the drum shaft) for loose magnets or damage. Check the stator windings for burn marks or damage. Test stator resistance between windings (should be 4–8 ohms for each winding). Replace damaged components.
  5. Check motor wiring and connections — Inspect all wires running from the motor to the control board for fraying, burn marks, or loose connectors. Clean any corroded terminals with electrical contact cleaner and ensure all connections are tight and secure.
  6. Test or replace the motor assembly — If all other components check out, the motor itself may be faulty. Professional diagnosis is recommended as motor replacement costs $200–$400 in parts plus labor. Consider washer age and overall condition before investing in this repair.

FAQ

Can I continue using my LG washer with the LE error?
No, you should not continue using the washer when the LE error appears. Running the machine with a locked motor can cause permanent damage to the motor windings, control board, and drive system. Address the issue immediately to prevent a more expensive repair.

How much does it cost to fix an LE error on an LG washer?
Simple fixes like removing obstructions or rebalancing loads cost nothing. Hall sensor replacement costs $50–$100 in parts plus $150–$200 labor. Complete motor assembly replacement ranges from $350–$600 total. If your washer is over 8 years old, replacement may be more economical than motor repair.

Why does the LE error keep coming back after I fix it?
Recurring LE errors usually indicate worn motor bearings, a failing hall sensor, or intermittent electrical connections. If the error returns after initial fixes, the motor components are likely degrading and may need professional assessment. Check that you’re not consistently overloading the washer, as this accelerates wear on motor components.