The DOR error on your Frigidaire washing machine means the machine has detected that the door or lid isn’t closed and locked properly. The washer won’t start a cycle until this is resolved. In most cases, checking the door latch and clearing anything blocking it fixes the problem in a few minutes.

Error code DOR
Meaning Door/lid not closed or locked, or the door switch/latch isn’t sensing properly
Severity Low — usually a quick fix, not a sign of major damage
Time to fix 5–20 minutes
Tools needed None for most fixes; screwdriver if the latch assembly needs replacing

What the DOR error means

Frigidaire washers use a door switch or latch assembly that tells the control board the door is shut and locked before the machine will run. The DOR code appears when that signal doesn’t come through, either because the door truly isn’t closed, the latch has failed, or something is stopping the door from sealing all the way.

This code is common on both front-load and top-load Frigidaire models, though the exact wording on the display can vary slightly by model. It’s a safety feature meant to stop the machine from running (and potentially spraying water) with the door open.

Common causes

  • Door or lid not pushed shut firmly enough to engage the latch
  • Clothing, a strap, or detergent residue caught in the door seal, blocking full closure
  • A worn or broken door latch/strike assembly that no longer catches
  • Faulty door switch that fails to send the closed signal to the control board
  • Loose or damaged wiring harness connected to the door switch
  • Overloading the drum, which puts pressure on the door and prevents a full seal

How to fix the DOR error

  1. Open and firmly reclose the door — Open the door fully, check nothing is caught in the seal, then push it shut until you hear or feel it latch.
  2. Remove excess laundry — If the drum is overloaded, take some items out so the door can close without pressure pushing back against it.
  3. Check the door seal for debris — Wipe down the rubber gasket and door edge to clear lint, detergent buildup, or small items stopping a tight seal.
  4. Inspect the latch assembly — Look for cracks or a latch that doesn’t click into place. A visibly broken latch will need replacing.
  5. Power cycle the washer — Unplug it or switch off at the breaker for one minute, then restart. This clears a temporary sensor glitch.
  6. Call a technician if the error persists — If the door closes properly and the code still shows, the door switch or wiring likely needs testing and replacement by an appliance repair professional.

FAQ

Why does my Frigidaire washer show DOR even though the door is shut?
This usually points to a faulty door switch or latch that isn’t sending the correct signal to the control board, even though the door itself looks closed. A technician can test the switch with a multimeter to confirm.

Can I still run a cycle after clearing the DOR error?
Yes, once the door closes and latches properly and the code clears from the display, you can start your cycle as normal.

Is the DOR error dangerous or likely to damage my washer?
No, it’s a safety lockout rather than a fault that damages the machine. It simply stops the wash cycle from starting until the door is confirmed closed and locked.