The E60 error on your Frigidaire dryer means the main control board has detected a communication problem with the motor control unit. This usually points to a wiring, connector, or motor control board issue rather than a simple sensor glitch. Most owners can clear it with a power cycle, but repeat errors usually mean a part needs replacing.

Error code E60
Meaning Communication fault between the main control board and the motor control board
Severity Medium — dryer may still run intermittently but should be checked soon
Time to fix 15–45 minutes
Tools needed Multimeter, screwdriver (Phillips and flathead)

What the E60 error means

Frigidaire dryers use two boards to run the machine: a main control board that reads your settings and a motor control board that drives the drum motor. The E60 code appears when these two boards stop talking to each other properly, often because of a loose connector, damaged wiring harness, or a fault on one of the boards themselves.

Because the drum motor relies on this communication link to start and stop safely, the dryer will usually pause the cycle and flash the code rather than keep running blind.

Common causes

  • Loose or corroded wiring connector between the main board and motor control board
  • Damaged wiring harness from heat exposure or wear over time
  • Faulty motor control board
  • Faulty main control board
  • Power surge or brief outage that disrupted communication
  • Static build-up affecting the control boards

How to fix the E60 error

  1. Power cycle the dryer: Unplug it for 60 seconds, or switch off the breaker, then restart. This clears many one-off communication glitches.
  2. Check the wiring harness: Unplug the dryer, remove the back or control panel, and inspect the wires running between the main control board and motor control board for looseness, fraying, or scorch marks.
  3. Reseat all connectors: Disconnect and firmly reconnect each plug on both boards. A loose pin is one of the most common causes of this code.
  4. Test with a multimeter: Check continuity on the wiring harness connecting the two boards. Replace any wire that shows no continuity or visible damage.
  5. Inspect both control boards: Look for burn marks, bulging capacitors, or a burnt smell. A visibly damaged board should be replaced rather than repaired.
  6. Call a technician if the error returns: If the code keeps coming back after checking wiring and connectors, the motor control board or main board likely needs professional replacement.

FAQ

Can I keep using my dryer after an E60 error?
You can try a cycle, but if the dryer stops mid-way or the code repeats, stop using it until the wiring or boards are checked, as running it repeatedly can cause further damage.

Does unplugging the dryer always fix E60?
Not always. It clears temporary faults, but if the cause is a damaged wire or failing board, the code will come back after a short time.

Is E60 expensive to fix?
A wiring fix is usually cheap and quick. Replacing a control board costs more, typically in the range of a mid-size appliance repair, so it’s worth checking wiring first before ordering parts.

If you’re also troubleshooting other Frigidaire appliances, you may find these guides useful: Frigidaire EF Error Code: Causes and Fixes, Frigidaire CA Error Code: Causes and Fixes, and Frigidaire CE Error Code: Causes and Fixes. For communication-related faults on other brands, see Maytag Washer E1 Error Code: Causes and Fixes.