The PF error on your Frigidaire means the oven detected a power interruption while it was running or had a program set. This is a notification code rather than a fault code, and it usually clears itself once you reset the clock and reprogram any cooking settings.

Error code PF
Meaning Power Failure — the oven lost electrical power and reset itself
Severity Low — no repair usually needed
Time to fix 2–10 minutes
Tools needed None

What the PF error means

PF stands for Power Failure. It appears on the display when the oven’s control board loses power, even briefly, and then powers back up. This can happen because of a household power cut, a tripped breaker, or the oven being unplugged and plugged back in.

Unlike fault codes such as F1 or F3, PF is not a sign of a broken part. It’s simply the control board telling you that the clock and any active cooking cycle were interrupted and need to be reset.

Common causes

  • A brief power outage in the home
  • A tripped circuit breaker or blown fuse feeding the oven’s circuit
  • The oven being unplugged, moved, or reconnected after an install
  • An electrician or appliance repair technician cutting power to the kitchen circuit
  • A loose or worn wall outlet or power cord connection causing intermittent power
  • A storm or grid-level electrical surge affecting the whole house

How to fix the PF error

  1. Clear the display: Press the “Off” or “Clear” button on the control panel. On most models this dismisses the PF message immediately.
  2. Reset the clock: Once cleared, set the time of day again. The oven needs this to run any timed or delayed cooking functions.
  3. Reprogram any settings: If you had a bake cycle, timer, or delay start running, re-enter those settings since they were lost during the power interruption.
  4. Check the breaker: If the PF code keeps reappearing, go to your electrical panel and check whether the breaker for the oven circuit has tripped or feels loose when reset.
  5. Inspect the power cord and outlet: For freestanding ovens, make sure the plug is fully seated in the outlet and the cord isn’t damaged or overheating.
  6. Call an electrician if it repeats often: Frequent, unexplained power drops that aren’t linked to a storm or outage may point to a wiring issue that needs professional attention.

FAQ

Does the PF code mean my oven is broken?
No. It simply means power was interrupted. As long as the oven powers back on normally and heats correctly, no repair is needed.

Why does PF keep coming back even when the power seems fine?
This usually points to a loose plug, a failing outlet, or a breaker that isn’t holding steady. Check these before assuming the control board is at fault.

Will I lose my oven’s other settings when PF appears?
Yes, the clock and any active cooking programs reset to default. You’ll need to re-enter the time and restart any cooking cycle you had running.