The F15 error on your Frigidaire means the electronic oven control has detected a stuck or shorted key on the touch pad. Unplugging the range for a few minutes and inspecting the touch pad often clears it, but a worn touch pad or control board may need replacing.

Error code F15
Meaning Stuck or shorted key detected on the touch pad/keypad
Severity Medium — the oven may lock out functions until cleared
Time to fix 10–40 minutes
Tools needed Screwdriver, soft cloth, multimeter (optional)

What the F15 error means

Frigidaire ranges use a touch pad connected to the electronic oven control (clock/timer) board. When the control senses that a button is stuck down or a section of the pad has shorted internally, it throws an F15 code and often beeps repeatedly. This is a safety measure so the oven doesn’t respond to a “phantom” button press.

The fault can come from the touch pad itself, the ribbon cable linking it to the control board, or moisture that has gotten behind the panel. It’s similar in nature to shorted-sensor issues seen on refrigerators, like the Frigidaire EF Error Code or the Frigidaire CA Error Code, where a component signal gets stuck outside its normal range.

Common causes

  • Spilled food, grease, or liquid trapped under the touch pad
  • A physically stuck or damaged button on the control panel
  • A worn-out or cracked touch pad membrane
  • A loose or corroded ribbon cable connector to the control board
  • Moisture or condensation behind the display after cleaning
  • A failing electronic oven control (ERC) board

How to fix the F15 error

  1. Power cycle the range: Turn off the breaker for 5 minutes, then restore power. This resets the control and often clears a one-off glitch.
  2. Wipe down the touch pad: Unplug the oven and clean the surface with a soft, slightly damp cloth to remove grease or spill residue that may be pressing a key.
  3. Check for a physically stuck button: Press each key gently to see if any feel jammed or don’t spring back; note which one triggers the error.
  4. Inspect the ribbon connector: With power off, remove the control panel cover and check that the ribbon cable from the touch pad to the control board is fully seated and free of corrosion.
  5. Let it dry out: If the panel was recently cleaned or exposed to steam, leave it unplugged for a few hours to fully dry before retesting.
  6. Replace the touch pad or control board: If the code returns after the steps above, the touch pad membrane or the electronic oven control board is likely faulty and should be replaced by a technician or a confident DIYer with the model-specific part.

FAQ

Can I keep using my oven while it shows F15?
It’s best not to. The stuck-key detection can prevent the oven from responding to real commands, and in rare cases it may keep an element or lock engaged. Power down and troubleshoot first.

Will unplugging the oven overnight fix F15 for good?
Sometimes, especially if the cause was moisture or a temporary short. If the error returns once the range warms up or after a few uses, the touch pad or ribbon cable likely needs replacing.

Is F15 the same as F10 or F11 on Frigidaire ovens?
They’re related but not identical. F10 and F11 also point to touch pad key faults, while F15 specifically flags a stuck or shorted key condition — the troubleshooting steps overlap heavily.